More brightness, more intense beams and more mobility add up to more pure lighting excitement from American DJ at the BPM Show, held 6-8 October 2012 at the National Exhibition Centre (NEC), Birmingham, UK.
More brightness, more intense beams and more mobility add up to more pure lighting excitement from American DJ at the BPM Show, held 6-8 October 2012 at the National Exhibition Centre (NEC), Birmingham, UK. “More bang for your buck” is another theme visitors will find at ADJ’s exhibit, located at Stand J11, since the company will be showing a number of products that combine two different lighting effects into one unit for greater economy and efficiency.
Here’s a look at some exciting new products that ADJ will be exhibiting at BPM, Stand J11:
Searching for a brighter beam? Look no farther than the X-Move LED 25R! This electrifying LED color/gobo moving head effect is twice as bright as its popular predecessor the X-Move LED Plus, thanks to the latest advancements in LED technology. Powered by a 25W white LED source, it comes loaded with professional features, including separate color and gobo wheels, 8 colors + white, 6 rotating gobos, gobo scroll mode, gobo shake effect, strobe/pulse effect, and exciting sound-activated built-in programs. The unit can also be operated via DMX, running on 9 channels, and it has the ability to be linked Master/Slave. Small and lightweight, it’s extremely mobile and can be easily set up by any size entertainer. Its long-life LEDs are rated at 50,000 hours, it can be run all night without duty cycles, and it draws only 75 watts of power.
Creating the intense, concentrated LED beam effect that’s so popular with today’s lighting designers, the Inno Color Beam will allow entertainers, nightclubs and stage productions to take their light shows to the next level. Its narrow 15° beam angle will “cut through” any background or wash effects with vivid, dramatic shafts of light. Powered by 12 high-quality CREE LEDs (3 red, 3 green, 3 blue and 3 white), this compact 36-watt fixture provides exceptionally smooth color mixing and is also stunning when used as an all-white effect. It can be run in DMX-512, Sound Active or Master/Slave modes and offers 0-100% dimming, 12 built-in color macros and a strobe/pulse effect.
Mega Go Bar50 &-- Mega Go Par64 –
Mobility never shone so brightly as it does with these two exciting “unplugged” battery-driven RGB LED color-mixing fixtures! The Mega Go Bar50 &-- Mega Go Par64 are powered by a built-in rechargeable lithium battery that will hold its charge for 8 hours, allowing you to create brilliant RGB color washes anywhere, without worrying about power connections.
The Mega Go Bar50 is a 2-foot linear lighting bar with 140 x 10mm LEDs (27 red, 60 green, 53 blue).
The Mega Go Par64 is a Par 64-style unit with 176 x 10mm LEDs (58 red, 60 green, 58 blue).
Weighing just 5 lbs. each, both units are as bright and powerful as much bulkier plug-in fixtures and they include professional features such as: smooth RGB color mixing (fast or slow color change operation); 32 built-in color macros; LED pulse and strobe effect; 0-100% electronic dimming; and a Battery Life Indicator. Both units can be operated in 5 modes: Auto (Program Run) Mode; Sound Active Mode; RGB Manual Control Mode; Static Color Mode, and DMX-512 Mode. To add to their go-anywhere convenience, they come with an ADJ LED RC remote controller.
A low-profile RGB LED wash fixture, the Jelly Par Profile comes in a transparent glowing case – making it 2-FX-in1! Its 108 10mm LEDs (26 red, 46 green, 36 blue) produce vibrant color washes, while its unique see-through case is a dazzling jewel-like effect itself. Great for uplighting, stage lighting, wall washing, mobile entertainers and special events, the Jelly Par Profile features an exclusive sit-flat design with its power and DMX connectors intelligently mounted on the side, not the rear, allowing it to be placed directly on the ground or inside truss without a bracket. It features DMX or manual operation, sound active mode, 32 built-in color macros, fast or slow color changes, pulse/strobe effect, 0-100% electronic dimming. Linkable via 3-pin XLR, it includes IEC AC input/output to daisy chain power. Low-maintenance and energy efficient, its long-life LEDs are rated at 50,000ours and it has a 14W maximum power draw.
These innovative LED-powered strobe lights are two FX in one: a traditional LED strobe and a 5-zone or 16-zone chase effect. The zone effect gives you the option to display the strobe bar either vertically or horizontally, and create a chasing white light for a truly dynamic visual show in the nightclub, on stage, or on the dance floor. Strobe speed, chase speed and dimming can be controlled either via DMX or manually. Both units can also be run in sound active mode to their own electrifying built-in programs. Equipped with 5 powerful 5-watt white LEDs and featuring a 5–zone chase effect, the FREQ 5 has an extremely bright output, yet consumes only 28 watts of electricity at maximum use. The larger FREQ 16 is powered by 16 5-watt white LEDs and features a 16-zone chase effect, while using only 91 watts maximum.